snow leopardとMeta doctorでWebOSをアクティベート

nabehisa2009-11-21


何度か一緒に飲んで話をしていただいた右脳先生なら良〜く分かって見えると思いますが(笑)、当方にはプログラムの知識がほとんどありません。

そんな当方でも素晴らしいパッケージを作っていただいた方々の知恵のお陰でこれまでも海外製のスマートフォンPDAを楽しませていただいてきました。

今回もミニーさん、せきのさん、そしてmeta doctorの作者の方(順不動)のお陰ですm(_ _)mm(_ _)mm(_ _)m

以下これまでの他の海外製機種と同様に、自分がpreのアクティベート中に躓きかけたことを覚え書きしておきます。

ただし、自分の中で再現して確かめておりませんし、知識の乏しい当方の記載ですので間違っていたり、不足していたりする部分もあると思いますが、そのあたりをご理解のほどお願いします


1,Meta doctor利用前にMacへインストールしておくもの

  • XCode Tools;Mac OS Xのインストールディスクに入っている開発環境です。
  • MacPortsUNIX向けのオープンソースソフトウェアをダウンロード、インストールして使用するのに必要。利用に必要な他のパッケージもまとめてインストールしてくれるソフトです。
  • gnutar;macでは、アプリケーション/ユーティリティからターミナルを開き、以下を打ち込みます。 

sudo port install gnutar


2.MetaDoctorの手順に従えばOKです

  • Getting readyの項目では、自分の場合は、以下の作業は不要でした。

2. If you do not have patch installed, you will need to install patch. On an Ubuntu system type:sudo apt-get install patch
3. If you do not have java installed do so. To install java, choose (applications>Ubuntu Software Center> type java 6 runtimein search) It is easiest to search for java to find it, then follow the on screen instructions. It should be pretty simple.

  • ターミナルから上手く書き換えることが出来なかったので、直接名前を書き換えました。

8. Rename the file that you download to webosdoctorp100ewwsprint-1.2.1.jar (or webosdoctorp100eww-wr-1.1.3.jar or webosdoctorp100ewwbellmo-1.2.1.jar). An example command to do that would be:mv webosdoctorp100ewwbellmo.jar webosdoctorp100ewwbellmo-1.2.1.jar

  • Doing itでは以下を行いました。

1. Navigate to the meta-doctor directory in the terminal by opening terminal and typing "cd meta-doctor"
2. Type one of the following:make CARRIER=wr unpack patch pack(当方の場合)

  • Prepare to run the new Meta'ed DoctorでMac OSX版のVirtualBox をここからダウンロードしました。

http://davidherron.com/blog/topics/628-virtualbox-running-ubuntu-accessing-host-file-system-mac-os-x

  • Once the Doctor is runningでは、

java -jar webosdoctorp100eww-wr-1.1.3.jarでDoctorを走らせるか、このフォルダ内の該当ファイルをダブルクリックして走らせます。

その後は以下の通りです。
1. Select your language
2. Accept the license agreement
3. Connect your Pre to your PC via USB and select "Next" when it becomes available

  • 最初とにかくPalm Preが認識しなかったので、SIMを入れた後、

1. With the USB cable connected, power off the Pre
2. Hold down the Up button on the volume rocker
3. While holding the Up button, power on the Pre
4. "Next" should now be enabled - proceed with the recovery

この作業を繰り返しました。上手くいく場合でも、アクティベートされるまで自分の場合Mac上にPreはマウントされませんでした。

  • Meta Doctorが走り出すと、この画面になります。


Pre上です。

  • 最後に驚くのがこの画面です(笑)


文鎮作成か?と焦りましたが、Palm preをMacから取り外して、裏蓋を取り、電池を外してリセットすればOKでした。


3,アクティベート後
以下の作業をSIMを入れて行わないとアプリストアに行くことが出来ません。自分の場合、ここもバイパスしてしまい、ミニーさんに教えていただきました。すいません。
After the doctor completes, you will need to run the "First Run" application. To do this, you will need an active internet connection. Either WiFi or Cellular.

ということで、当方でもアクティベートできました(^^;
こちらの方、一日でもはやく仲間になってください(笑)

皆様に感謝ですm(_ _)m